Precautions - Biotek Cytation 5 Instructions For Use Manual

vi | Preface
Warning! Unspecified Use. Failure to operate the equipment
according to the guidelines and safeguards specified in this manual
could result in a hazardous condition.
Warning! Software Quality Control. The operator must follow the
manufacturer's assay package insert when modifying software
parameters and establishing reading methods. Failure to conduct
quality control checks could result in erroneous test data.
Warning! Reader Data Reduction Protocol. No limits are applied to
the raw measurement data. All information exported via computer
control must be thoroughly analyzed by the operator.
Warning! Internal Voltage. Always turn off the power switch and
unplug the power supply before cleaning the outer surface of the
instrument or removing its top case.
Warning! Potential Biohazards. Some assays or specimens may
pose a biohazard. This hazard is noted by the symbol shown here.
Adequate safety precautions should be taken as outlined in the assay's
package insert. Always wear safety glasses and appropriate protective
equipment, such as chemical-resistant rubber gloves and apron.
Warning! LED Lights. Serious eye injury may occur if you stare
directly at the LED during operation of the light. This hazard is noted by
the symbol shown here.
Warning! Pinch Hazard. Some areas of the dispense module can
present pinch hazards when the instrument is operating. The module is
marked with the symbol shown here. Keep hands/fingers clear of these
areas when the instrument is operating.

Precautions

The following precautions are provided to help avoid damage to the instrument:
Caution: Service. The instrument should be serviced by BioTek-
authorized service personnel. Only qualified technical personnel should
perform service procedures on internal components.
Caution: Spare Parts. Only approved spare parts should be used for
maintenance. The use of unapproved spare parts and accessories may
result in a loss of warranty and potentially impair instrument performance
or cause damage to the instrument.
Caution: Environmental Conditions. Do not expose the system to
temperature extremes. For proper operation, ambient temperatures should
remain within the range listed in the Specifications chapter. Performance
may be adversely affected if temperatures fluctuate above or below this
range. Storage temperature limits are broader.
BioTek Instruments, Inc.