Table of Contents
Advertisement
• Click
Auto Focus
• Repeat these two steps until the image is exposed and focused to your
liking.
Capture and Save an Image
When you have a satisfactory image, you can capture and save it for later analysis.
1. When an image in the Capture dialog is in focus, click
2. To save the captured images, click Review/Save.
3. Click
to adjust the brightness and contrast adjustments or
manually align overlaid images to compensate for pixel shift, then click
.
Save
#
Description
1
Select a color channel
2
Use the sliders or +/– buttons to adjust brightness and contrast
3
Have Gen5 automatically adjust brightness and contrast
4
Set to neutral settings (similar to the default settings)
5
If selected, changes to brightness and contrast will apply to all color
channels of the image
6
Reset to default settings
7
Select a color channel
8
Gen5 displays the number of pixels the channel is shifted
9
Reset to default settings
10
Adjust the shift using the arrows
Cytation 5
, or click the arrow buttons until the image is in focus.
Gen5 Software |
37
to capture it.
to
Advertisement
Table of Contents
Troubleshooting
