Cisco 340 Series Configuration Manual page 94

wmm
wmm
To configure Wi-Fi Multimedia (WMM) for an access point, use the wmm command in the WiFi AP
interface configuration mode.
Syntax Description on
off
Command Default WMM is disabled.
Command Modes WiFi AP interface configuration
Usage Guidelines WMM provides QoS for wireless traffic. If there is a lot of mixed media traffic (voice, video, data),
enable WMM.
Related Commands
Use the
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
2-76
wmm {on | off}
Enables WMM.
Disables WMM.
apsd command to configure WMM power save mode.
Chapter 2 Configuring Local CLI - CLISH
OL-29491-01