Cisco 340 Series Configuration Manual page 54

wifi-mode
wifi-mode
To set the WiFi mode of the Cisco Edge 340 Series device, use the wifi-mode command in the global
configuration mode.
Syntax Description ap
client
off
Command Modes System configuration
Usage Guidelines If you choose the AP mode, the Cisco Edge 340 Series device will work in the AP mode immediately,
and only the commands that are specific to the AP mode are visible. If you choose the client mode, the
Cisco Edge 340 series device will work in the client mode immediately, and only the commands that are
specific to the client mode are visible.
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
2-36
wifi-mode {ap | client | off}
Sets the WiFi mode to access point (AP) after reboot.
Sets the WiFi mode to client after reboot.
Sets the WiFi mode to off.
Chapter 2 Configuring Local CLI - CLISH
OL-29491-01