Cisco 340 Series Configuration Manual page 52

ssid
ssid
To set the Service Set Identifier (SSID) name and enter the SSID configuration mode to configure the
security settings for the access point of the device, use the ssid command in the system configuration
mode.
Syntax Description ssid
Command Default The default SSID name is CISCO_EDGE.
Command Modes
System configuration
Related Commands Use the
Table 2-6 on page 2-77
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
2-34
ssid ssid
SSID name for the access point. The name can include all the ASCII characters
except ' \ " ? = , and space.
exit command to leave the SSID configuration mode.
lists the SSID configuration mode commands.
Chapter 2 Configuring Local CLI - CLISH
OL-29491-01