Configuring Date And Time - Cisco 340 Series Configuration Manual

System Configuration
There are two types of Dualscreen mode:
•
•
You can choose dual screen mode type from the Dualscreen mode drop-down list
Extend type of Dualscreen mode, click Switch the position to exchange the main screen with screen 2.
Figure 3-7

Configuring Date and Time

Click Date and Time in the left pane to configure the date and time information of the Cisco Edge 340
Series device.
Choose the mode of configuring date and time: Automatically synchronize with NTP server or
Step 1
Manually set time. Go to
Step 2 If you choose Automatically synchronize with NTP server, the Date and Time fields are disabled; you
cannot make changes to them.
Step 3 Enter the NTP server address in the NTP server field and go to
Step 4 If you choose Manually set time for the mode in
modify it.
Step 5 Click the calendar icon to the right side of the Date field, choose month and year from the drop-down
list, and click the corresponding date.
In the Time field, choose hour in the left drop-down list and minute from the right drop-down list.
Step 6
Step 7 From the Time zone drop-down list, choose a time zone.
Step 8 Click Apply to save the changes and Reset to restore the default values.
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
3-6
Extend—The main screen displays the main view of the system, and screen 2 extends the main
screen for more views.
Duplicate—Both screens have the same view of the system.
Dualscreen Mode Type
Step 4 if you choose Manually set time.
Step 1, the NTP server field is disabled; you cannot
Chapter 3 Configuring the Web GUI
(Figure 3-7). For the
Step 7.
OL-29491-01