Cisco 340 Series Configuration Manual page 100

encryption mode (802.1x)
encryption mode (802.1x)
To configure Wi-Fi Protected Access (WPA) authentication and associated encryption for an access
point, use the encryption mode command in the SSID configuration mode.
Note The encryption mode (802.1x) should be used in combination with RADIUS server.
Syntax Description wpa
wpa2
wpa1wpa2
tkip
aes
tkipaes
Command Default
The default mode is wpa2psk access, tkipaes encryption, and the password is Cisco123.
Command Modes SSID configuration
Examples This example shows how to configure combined WPA and WPA2 authentication with combined TKIP
and AES encryption, using the 802.1x authentication method:
encryption mode wpa1wpa2 type tkipaes
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
2-82
encryption mode {wpa | wpa2 | wpa1wpa2} type {tkip | aes | tkipaes}
Configures WPA with 802.1x authentication.
Configures WPA2 with 802.1x authentication.
Configures combined WPA and WPA2 with 802.1x authentication.
Configures Temporal Key Integrity Protocol (TKIP) encryption.
Configures Advanced Encryption Standard (AES) encryption.
Configures combined TKIP and AES encryption.
Chapter 2 Configuring Local CLI - CLISH
OL-29491-01