Command Reference - Cisco 340 Series Configuration Manual

Command Reference

Command Reference
This sections contains the commands of the following modes:
•
•
•
•
•
•
•
Note Syntax description, command default, command mode, usage guidelines, and examples are provided
only for commands that are not self-explanatory.
User Configuration Mode Commands
This section contains user configuration mode commands.
commands perform.
Table 2-1
Command
enable
exit
help
ping
show
traceroute
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
2-4
User Configuration Mode Commands
Global Configuration Mode Commands
System Configuration Mode Commands
Ethernet Interface Configuration Mode Commands
WiFi AP Interface Configuration Mode Commands
SSID Configuration Mode
show Commands
User Configuration Mode Commands
Table 2-1
Function
Enters the global configuration mode.
Exits from the CLI.
Shows the descriptions of the interactive help system.
Diagnoses basic network connectivity, and verifies if the remote
device is reachable.
Shows running system information.
Prints the route packets trace to the network host.
Chapter 2 Configuring Local CLI - CLISH
describes the functions these
OL-29491-01