Cisco 340 Series Configuration Manual page 91

Chapter 2 Configuring Local CLI - CLISH
transmit preamble
To configure the preamble for an access point, use the transmit preamble command in the WiFi AP
interface configuration mode.
Syntax Description long
short
auto
Command Default The default is a long preamble.
Command Modes WiFi AP interface configuration
Usage Guidelines
Use the long preamble setting for compatibility with legacy 802.11 systems operating at 1 and 2 Mb/s.
Configure a short preamble setting to improve throughput performance.
OL-29491-01
transmit preamble {long | short | auto}
Configures a long preamble.
Configures a short preamble.
Configures automatic preamble selection.
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
transmit preamble
2-73