Cisco 340 Series Configuration Manual page 53

Chapter 2 Configuring Local CLI - CLISH
vga
To configure the Video Graphics Array (VGA) resolution or rotation, use the vga command in the system
configuration mode.
Syntax Description resolution
rotation
Command Modes
System configuration
OL-29491-01
vga {resolution resolution | rotation rotation}
Resolution that you want to set, in the form xx@yy.
Rotation that you want to set. Valid values are normal, right, inverted, and
left.
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
vga
2-35