Cisco 340 Series Configuration Manual page 68

apsd
apsd
To configure Wi-Fi Multimedia (WMM) power save mode for an access point, use the apsd command
in the WiFi AP interface configuration mode.
Syntax Description on
off
Command Default WMM power save mode is disabled.
Command Modes WiFi AP interface configuration
Usage Guidelines You can configure the apsd command only when the WMM is enabled.
Related Commands
Use the
Cisco Edge 340 Series Software Configuration Guide, Release 1.0
2-50
apsd {on | off}
Enables WMM power save mode.
Disables WMM power save mode.
wmm command to enable WMM.
Chapter 2 Configuring Local CLI - CLISH
OL-29491-01