If The Starting System Is Not Working; Continuity Of 10A / 5A Fuse; Condition Of Battery; Starting System 2 - Malaguti F12R L.C. 50 cc Workshop Manual

F12R L.C. 50 cc.
If the starting system is not working, check:
1) CONtINUItY OF 10a / a FUSe
)

CONDItION OF BatterY

3) OperatION OF Starter MOtOr
4) OperatION OF StartING reLaY
) KeY SWItCh
6) FrONt/rear StOp SWItCh
7) Start SWItCh (Start)
8) CONNeCtION OF StartING SYSteM

1. continuity of 10a / 5a fuse

- remove fuse.
- Connect Tester (Ω) to fuse.
- Check continuity of fuse.
- Not compliant: replace fuse.
F. 11
2. condition of battery
- Check condition of battery.
- Minimum voltage: 12.5 V.
- Density of electrolytic solution: 1.280 g/dm
- Not compliant: clean terminals.
recharge or replace battery.
F. 1
0.07
ISSUe
Ignition System
STaRTING SySTEm
3
BATTERIA
Tester (Ω)
-
B
Chapter
17
paGe