Checking Fuses - Malaguti F12R L.C. 50 cc Workshop Manual

F12R L.C. 50 cc.
FUSES

cHEcKING FUSES

CAUTION: when checking fuses, always turn the main switch "OFF" or short-circuits may occur.
Checking procedure:
- Connect Tester (code n°08609500) to fuse and check continuity.
NOTE: put the Tester on "Ω" (sound-emitting function).
- If the tester is showing "I" and no sound is given, replace the fuse.
replacing procedure:
- turn key "OFF".
- Fit a new fuse with a correct amperage rating.
- turn key "ON".
- turn switches on to check operation of the relative electrical systems.
- If the fuse blows again, check the relative circuit.
CAUTION: never use fuses with an amperage rating differing from that indicated. Use only fuses and
never other materials.
An unsuitable fuse can cause extensive damage to the electrical system, malfunctioning of the ignition
and light systems and even fires to break out.
F. 3
a
B
C
F. 4
0.07
ISSUe
Fuses
a) 10A Main / Recharging
B) 5A
Stop / Turn indicators / Horn
C) 7.5A Lights / Starter
B
Chapter
13
paGe