If “Mode” Button Is Not Working; Continuity Of “Mode” Button - Malaguti F12R L.C. 50 cc Workshop Manual

B
Chapter
If "mOdE" button is not working, check:
1) CONtINUItY OF "MODe" BUttON
) VOLtaGe DeLIVereD tO "MODe" BUttON
3) CONtINUItY OF GreY/reD CaBLe
1. continuity of "mOdE" button
- Disconnect four-way connector of right hand switch.
- Connect Tester (Ω) to connector, as follows:
- terminal (+) of tester
- terminal (-) of tester
- press "mOdE" button.
- Check continuity.
- Not compliant: replace right hand switch.
F. 4
36
paGe
Signalling System
Blue cable (1).
Grey/red cable (2).
0FF 0FF
ON ON
MODE START
1
2
F12R L.C. 50 cc.
Tester (Ω)
0.07
ISSUe