Resistance Of “Cdi” Control Unit (Red); Stator Pick-Up Resistance - Malaguti F12R L.C. 50 cc Workshop Manual

F12R L.C. 50 cc.
3. Resistance of "cdI" control unit (red)
- Connect tester (2kΩ) to "CDI", as follows:
- terminal (+) of tester
- terminal (-) of tester
- resistance: 525 ÷ 640 Ω at 20°c (F.7a).
- terminal (+) of tester
- terminal (-) of tester
- resistance: 335 ÷ 385 Ω at 20°c (F.7b).
- Not compliant: replace "CDI" control unit (code n° 0411000).
Tester (2kΩ)
1
F. 7a

4. Stator pick-up resistance

- remove two-way connector of wiring.
- Connect Tester (Ω) to connector of flywheel magneto (V).
- terminal (+) of tester
- terminal (-) of tester
- Stator pick-up resistance: 195 ÷ 205 Ω at 20°c.
- Not compliant: replace stator.
V
F. 8
0.07
ISSUe
Starting System
hV screw (V).
PIN 1 (GNd).
PIN 1 (GNd).
PIN 2 (PIcK-UP).
V
F. 7b
red cable (1).
Ground (2).
1
R
GL
Tester (2kΩ)
1
2
2
B
Chapter
Tester (Ω)
1
paGe