Voltage Delivered To “Mode” Button; Continuity Of Grey/Red Cable - Malaguti F12R L.C. 50 cc Workshop Manual

F12R L.C. 50 cc.
2. Voltage delivered to "mOdE" button
- Connect Tester (20 V dc) to connector (system side), as follows:
- terminal (+) of tester
- terminal (-) of tester
- turn key "ON".
- Voltage delivered to right hand switch: > 12 V.
- Not compliant: blue cable interrupted. repair.
See "Wiring Diagram".
F. 43

3. continuity of grey/red cable

- Connect Tester (Ω), as follows:
- terminal (+) of tester
- terminal (-) of tester
- compliant: replace digital instrument.
- Not compliant: grey/red cable is interrupted. repair.
See "Wiring Diagram".
12 24
11
23
10
22
21
9
8 20
19
7
18
6
17
5
4
16
3 15
2 14
VR
13
1
F. 44
0.07
ISSUe
Blue cable (1).
Chassis grounding (2).
0FF 0FF
ON ON
MODE START
1
Grey/red cable (right hand switch) (1).
Grey/red cable (PIN 14 of instrument board) (2).
2
Signalling System
2
Tester (Ω)
B
Tester (dc 20 V)
0FF 0FF
ON ON
MODE
START
1
paGe
Chapter
37