Table of Contents
Advertisement
WARTUNG & INSTANDHALTUNG
1.
Loosen the axle nut (1)
2.
Loosen the lock nut (2)
ENG
3.
Turn the adjustment screw (3) to set the correct
tension.
4.
When the vehicle is not loaded, the chain
tension should be 5-10mm (4).
5.
Tighten the axle nut. Tightening torque : 85 -
95 Nm
BATTERY
The vehicle is equipped with a maintenance-free
battery.
Never open the battery. This would be dangerous
and cause permanent and severe damage to the
battery. Ensure that the battery is kept away from
other hazardous environments such as open fires or
cigarettes and that there is adequate ventilation.
When charging the battery indoors, always ensure
that the battery is kept in a safe place.
24 XAM
FUSES
If the vehicle's display does not work after switching
on the main switch and ignition, this may be due to
a blown fuse.
Change fuse:
1.
Switch off the main switch and disconnect the
battery.
2.
Open the white transparent fuse holder of the
battery and replace the fuse. (Glass tube fuse
10A)
3.
Reconnect the battery and switch on the main
switch.
4.
Check the function of the electrical components.
5.
If the fuse breaks again, contact your dealer to
check the electrical system.
WARNING
Do not use a fuse with a higher ampere rating as this
may cause serious damage to the electrical system or
fire.
Advertisement
Table of Contents
