Table of Contents
Advertisement
A
When substituting a TEC B-470/870 model printer with a 6700 or 6700-M40
printer, refer to the TGL conversion table below.
TEC B-470/870 Series
PARAMETER SET MODE,
Feed Adjust - (-50.0 to +50.0 MM) +0.0 MM*
- Feed length, fine adjustment. Adjusts
vertical print position on label. (- ) value
moves the image down from the leading edge
of the label. (+ ) value moves the image up
toward the leading edge of the label.
PARAMETER SET MODE,
Cut Adjust - (-50.0 to +50.0 MM)+0.0 MM -
Cut or tear off strip position, fine adjustment.
(- ) value sets leading edge of label behind
the tear bar. (+) value sets the leading edge of
the label past the tear bar.
PARAMETER SET MODE,
Back Feed - (-9.5 to +9.5 MM)
+0.0 MM - Adjusts vertical print position on
label. (+) value moves the image down from
the leading edge of the label. (-) value moves
the image up toward the leading edge of the
label.
PARAMETER SET MODE,
X Adjust - (-99.0 to +99.0 MM)
+0.0 MM - X axis (horizontal) print position,
fine adjustment. (+) value shifts image left. (-)
value shifts image right.
TGL Menu Conversions
Table 3: TGL Menu
6700: QUICK SETUP Menu
6700-M40: MEDIA SETUP Menu
Ver Image Shift - (-1 to+12.8") 0.0*".
Adjusts vertical print position on label.
(- ) value moves the image up toward the leading edge of
the label. (+ ) value moves the image down from the
leading edge of the label.
6700: QUICK SETUP Menu
Tear Off Adjust- (-0.50 to+0.2) 0.00 Inch*
6700-M40: MEDIA SETUP Menu
Paper Feed Shift - (-0.50 to+12.8) 0.00 Inch*
Adjusts Tear Off, Tear-Off Strip, Peel-Off & Cut position in
Inches or MM. (-) value sets leading edge of label behind
tear bar. (+) value sets the leading edge of the label past
the tear bar.
6700: QUICK SETUP Menu
6700-M40: MEDIA SETUP Menu
Ver Image Shift - (-1 to+12.8") 0.0*".
Adjusts vertical print position on label.
(+) value moves the image down from the leading edge of
the label. (-) value moves the image up toward the
leading edge of the label.
6700: QUICK SETUP Menu
6700-M40: MEDIA SETUP Menu
Hor Image Shift - (-1.0 to +1.0) 0.0"*.
Adjusts image horizontally from left edge of label in
inches. (+) value shifts image left. (-) value shifts image
right.
6700 or 6700-M40
with TGL Emulation
25
Advertisement
Table of Contents
