InfoPrint 6700 Series Programmer's Reference Manual page 31

Table 4. Status Response (not saving writable characters to flash)
LCD Message
Communication Parity, overrun, framing error occurred
error during serial comm.
Paper jam Paper jam occurred during paper feed
Cutter error Fault condition in the cutter
No paper The label has run out
No ribbon The ribbon has run out
Head open An attempt was made to feed or issue
with the head open
Excessive head The thermal head temperature has
temperature become excessively high.
Ribbon error Fault condition in ribbon transport
Rewind full Overflow in the rewinder
On line No error in label issue
On line No error in feed
NOTE: This status will not be sent out if the serial interface is used. Other than on TEC printers,
InfoPrint printers will go offline when an error occurs, and therefore prevent the host
computer from sending status request commands.
Printer Status
Status
Auto Status
Request
Transmission
Command
07 07.
See Note on
page 31.
11 11.
See Note on
page 31.
12 12.
See Note on
page 31.
13 13.
See Note on
page 31.
14 14.
See Note on
page 31.
15 15.
See Note on
page 31.
18 18.
See Note on
page 31.
21 21.
See Note on
page 31.
22 22
See Note on
page 31.
40 X
41 X
31