Table of Contents
Advertisement
Appendix A
TEC B-470/870 Series
N/A
N/A
N/A
N/A
28
Table 3: TGL Menu (continued)
TGL SETUP Menu,
U1/U2 Move CMDs - (Process*, Ignore)
Process - U1 move media forward & U2 move media
backward cmds are used & override the Quick Setup
menu (6700) or Media Setup menu
(6700-M40) Ver Image Shift value.
Ignore - U1 and U2 commands are ignored and Quick
Setup menu (6700) or Media Setup menu
(6700-M40) Ver Image Shift value is used.
TGL SETUP Menu,
XS Media 'D' Act - (Tear-Off*, Peel-Off, Ignore,
Continuous, Tear-Off Strip)
Note: Tear-Off is available for 6700 printers only and is
the default value. Tear-Off is not available for 6700-M40
printers. Tear-Off Strip is the default for 6700-M40.
Uses the XS media 'D' command to select any of the
Media Handling modes listed above.
Ignore - The printer only uses the Media Handing mode
selected in the Quick Setup menu (6700) or Media Setup
menu (6700-M40).
TGL SETUP Menu,
AR Pre-feed CMD - (Process*, Ignore)
Process - Printer uses the media pre-feed AR command.
Ignore - Printer ignores the pre-feed AR command.
Media is not pre-fed.
TGL SETUP Menu,
AX Fine Adj. CMD - (Process*, Ignore)
Process - Position fine adjust AX command is acted on if
received.
Ignore - Position fine adjust AX cmd is ignored if
received. Media will not be fine adjusted.
6700 or 6700-M40
with TGL Emulation
Advertisement
Table of Contents
