InfoPrint 6700 Series Programmer's Reference Manual page 27

TEC B-470/870 Series
Data Protocol - XON/XOFF*, Ready Busy
(DTR), XON/XOFF +Ready Busy(DTR).
DIP SW 2 ( 7-8)
N/A
N/A
N/A
N/A
N/A
Table 3: TGL Menu (continued)
SERIAL PORT,
Data Protocol -
(XON/XOFF*, ETX/ACK, ACK/NAK, Series 1 Char,
Series 2 Char or DTR)
TGL SETUP Menu,
Active - (Yes*, No)
Yes - All data is parsed by the TGL emulation.
Non-TGL data is absorbed.
No – All non-TGL data prints.
TGL SETUP Menu,
Image Scale - (Disable*, Enable)
Enable - For 6700, images are scaled from TEC printer
resolution (306 dpi) to TGL resolution
(300 dpi). For 6700-M40 printers, images are scaled from
TEC printer resolution (306 dpi) to TGL resolution
(305 dpi).
Disable - No scaling, resulting in 2% larger images on
TGL printers vs TEC printers.
TGL SETUP Menu,
EURO Symbol - (0x0 - 0xFF) 0XB0*
Allows configuration position of _ symbol in the code
pages.
TGL SETUP Menu,
Speed CMDs - (Process*, Ignore)
Process - Print speed in the XS command & slew speed
in the T command will be used and override the Media
Control menu settings.
Ignore - Print speed in the XS command & slew speed in
the T command will have no effect. The Media Control
menu settings will be used instead.
TGL SETUP Menu,
AY Intensity CMD - (Process*, Ignore)
Process - Print Intensity via the AY command is used &
overrides the Quick Setup menu value (6700) or Media
Setup menu value (6700-M40).
Ignore - Print Intensity via the AY command is ignored.
Quick Setup menu value used instead.
6700 or 6700-M40
with TGL Emulation
27