Command Enhancements And Differences; J1 - Flash Format; Li - Listen Mode; T - Feed - InfoPrint 6700 Series Programmer's Reference Manual

4
Command Enhancements
And Differences
J1 – Flash Format
Similiar to TEC printers, the flash files are removed, but the flash memory is
not formatted. To reuse the flash memory, an optimize and reboot action is
required.
~LI – Listen Mode
This command is not supported on TEC printers. It allows the TGL emulation
to become active again after it has been put in quiet mode through the ~QU
command.
T – Feed
The ribbon-saving function supported on TEC printers is not supported on
TGL printers. Enabling ribbon-saving on TGL printers will therefore have no
effect.
XB – Barcode
The Japanese barcode types (parameter values R and S) are not supported
in TGL.
XS – Issue
The ribbon-saving function supported on TEC printers is not supported on
TGL printers. Enabling ribbon-saving on TGL printers will therefore have no
effect.
~QU – Quiet Mode
This command puts the TGL emulation in quiet mode, which allows for the
printing of pure text until the listen command is received (~LI). In Quiet Mode
TGL commands are ignored.
23