How To Set Picture Size In Split Effects - RGBlink VSP3500 User Manual

6. System Setup and Operations

How to set picture size in split effects?

How to set picture size in split effects?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to:
Button operation is as follows:
1. When VSP 3500 is in split mode, press any key of DVI1, DVI2, DVI3,
DVI4 in OUTPUTS area, select preset outputs, key lights, and it is
selected;
2. In CUSTOM ADJUSTMENTS area, press 【 SCALE 】 keys, key
lights, user can set the size of output image;
3. Rotate Up/Down knob and Left/Right knob, set the size of output
image;
4. In OUTPUTS area, press DVI1, DVI2, DVI3, DVI4 again, regulate the
selected output, repeat step 2 and 3 to complete regulation setting.
VSP 3500
How to determine equipment run normally?
User Manual 98