How To Clear Layer - RGBlink VSP3500 User Manual

6. System Setup and Operations

How to clear layer?

How to clear layer?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to:
Operation is as follows:
1. In LAYER area, press any key of layer A, B, C, D that need to clear,
key blinks.
2. Press the key again, key light is off, and clear layer finished.
For example, clear layer B, LCD panel shows as follows:
VSP 3500
How to determine equipment run normally?
LAYERB OF OUPUT1：
CLEAR
User Manual 89