How To Achieve Quick Split - RGBlink VSP3500 User Manual

Hide thumbs Also See for VSP3500:

Table of Contents

6. System Setup and Operations

How to achieve quick split?

Firstly, ensure the equipment is on power and run normally. For details,

please refer to:

There are single device split and multiple split modes, specific

operations are as follows:

1. For multiple split mode, first press MENU button, and choose ―OUTPUT

CONFIG‖ option, rotate the knob, choose ―EXTERNAL SYNC‖.

Note

2. Press any key in SPLIT MODE area, and choose split modes.

3. Rotate the knob, choose ―START X‖ and ―START Y‖ option (The

horizontal starting position and vertical starting position that current

device corresponding screen area in the entire LED display).

4. Rotate the knob again to set ―START X‖ and ―START Y‖.

5. When finish, press 【SAVE】 key to save.

Here we will take field glyph mode with two devices for example:

Total screen width 5128, total screen height 1536, the width of the four

screens are 1440, 1632, 1344, 712, and height is 896, 640, settings are

as follows:

VSP 3500

How to determine equipment run normally?

If choose ―EXTERNAL SYNC‖, the output

resolutions should be the same.

User Manual

Table of Contents