Table of Contents
Advertisement
6. System Setup and Operations
How to load the saved parameters?
How to load the saved parameters?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to:
Button operation is as follows:
When VSP 3500 function setting is finished, VSP 3500 provide 10 save
modes to load in order to avoid setting again when use the same function
or set again after restarting because of power out.
1. Press 【LOAD】 key, key lights, and meanwhile button 0~9 light, start
the load option:
2. Choose the corresponding position and load. LOAD FROM 1 ~LOAD
FROM 9 corresponding button 1~9, LOAD FROM10 corresponding
button 0.
For example, choose LOAD FROM 1, LCD panel shows as follows:
VSP 3500
How to determine equipment run normally?
LOAD
> LOAD FROM 1~10
LOAD FROM 1
LOAD FINISH
Note
VSP 3500 is default recall SAVE 1 parameters.
User Manual
101
Advertisement
Table of Contents
