6. System Setup and Operations
How to rotate layer image?
How to rotate layer image?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to:
Button operation is as follows:
1. Press MENU key, choose 【LAYER CONFIG】 option:
2. Press NEXT, and enter to Layer A:
3. Press NEXT again, and enter SET ROTATE:
4. Press NEXT, choose SET ROTATE, rotate LEFT/RIGHT knob to
choose rotate mode;
5. LCD panel shows rotate mode, VSP 3500 provides 2 kinds of rotate
modes for user, that is image rotate to left or right.
Note
VSP 3500
How to determine equipment run normally?
VSP 3500
*LAYER CONFIG
LAYER CONFIG
*LAYER A
LAYER A
*SET ROTATE
Rotate effects setting is only for Layer A, and
are invalid for other layers.
User Manual
>>
>>
>>
99