How To Crop The Layer Image - RGBlink VSP3500 User Manual

6. System Setup and Operations

How to crop the layer image?

How to crop the layer image?
Firstly, ensure the equipment is on power and run normally. For details,
please refer to:
Button operation is as follows:
1. In CUSTOM ADJUSTMENTS area, press【CROP】 key, key lights,
and start crop the layer image function;
2. In LAYER area, press any bright key of A, B, C, D (keys light are
optional ), key lights, and it can be edited;
3. Rotate left/right knob, and adjust the menu options, menu displays as
follows:
CROP X: X axis starting point;
CROP WIDTH: Crop width;
4. Rotate left/right knob, and adjust the optional value;
5. Press【CROP】key again, key light is out, and close crop function.
VSP 3500
How to determine equipment run normally?
User Manual
CROP Y: Y axis starting point;
CROP HIGHT: Crop height;
92