How To Set Picture-In-And-Out Effect - RGBlink VSP 737 User Manual

5. System setting and operation

How to set picture-in-and-out effect

How to Set Picture-in-and-out Effect
Firstly assure the device is powered on.
Device is in Normal Operation.
1. Select the layer to be edited, tap
is selected; Preview picture's red frame shows current system's default
shifting position and size;
2. Rotate the knob to set on shifting picture, items below include:
POS X MOVE SETUP; POS Y MOVE SETUP; WIDTH MOVE SETUP;
HEIGHT MOVE SETUP;
At the time, key
3. When items above are set, tap
LCD screen shows:
4. Tap
picture-in-and-out effect;
5. Tap
shows:
Note
VSP 737
blinks always;
END MOVE STEUP
, choose switching keys
, key lights off, MOVE SETUP functions off, LCD screen
CLEAR MOVE SETUP
Apply and
tapping , assure
else key is not editable.
User Manual
Details are in: How to Confirm the
, key lights on, the current layer
, key lights on without blinking,
together to realize MOVE SETUP, after
key lights on without blinking, or
to realize
75