Load Unit Menu; Negative Pressure Pump Menu - MUTOH Toucan Hybrid PJ-162-FE User Manual

5.4.48 Load unit menu

Sets the operation of the feeding unit
Setup Items Parameters
Load Unit Inside
<Outside>
-

5.4.49 Negative pressure pump menu

The operational pressure of the vacuum pump is set here
Notes:
• Adjust the working pressure of the negative pressure pump when:
Setup Items Parameters
Neg Press -3.0kPa to <2.1kPa> to –
1.5kPa
* LoadUnit *
F1 →
Inside
- outside -
Printing becomes smeared or misprinted and cannot be corrected by performing
headcleaning: increase the parameter
Ink drips from the print head face during ink replenishment: decrease the parameter
* NegPress *
- 3.0 kPa - - 1.5 kPa
F2 , F4
Ouside
(1/1)
Descriptions
Set when using the roll media such as the printable side is
inside
Set when using the roll media such as the printable side is
outside
After setting, shift to the previous hierarchy menu.
→ Utility menu
+
- 2.1 kPa -
→ ENTER
Descriptions
Change operating pressure of negative pressure pump by
operating the following keys.
• [F2] key: Increase setup value.
• [F4] key: Decrease setup value.
• [ENTER] key: Confirm setup value, shift to the previous
hierarchy menu.
• [CANCEL] key: Cancel setup value, shift to the previous
hierarchy menu.
→ Utility menu
144
User's Guide – Toucan Hybrid
← F2
← F2
← F4
AP-750, Rev. 1.1 –- 23/04/04