Cautions On Handling Media - MUTOH Toucan Hybrid PJ-162-FE User Manual

5.3.2 Cautions on handling media

When you handle media, pay attention to the following.
Notes :
Use the recommended medias in an appropriate environment.
Following are the temperature and humidity ranges appropriate for printing.
Do not use any of the following media.
The size of the recommended medias can change at a fixed ratio according to the
temperature changes of the working environment. Before using the media, place the
media in the working environment for at least 30 minutes, to have it match the
temperature of the working area.
Printing before media adjusts to the printing environment may cause media jams due to
slippage or creases. This also adversely affects the quality of printing.
Media has a printable side and a non-printable side. If you print on a not printable side,
blurring or slight touching may occur.
Do not touch the printable side of media. Moisture or oil from hands affects the printing
quality.
Do not leave the printer for a long time with media loaded. The media may curl resulting
in misalignment of media, media jams, or decreased printing quality. In particular, avoid
this in winter, dry seasons, or during final printing.
Do not lose the box or rapping bag for storing media.
Important:
In case the carriage or infrared lamp touches the media, power OFF and ON the
unit. Do not touch the carriage or infrared lamp.
Media with crease, scar, tear, twist or media which tends to curl.
Welded media
112
User's Guide – Toucan Hybrid
AP-750, Rev. 1.1 –- 23/04/04