Appendix; Introduction; Product Specifications; Toucan Hybrid Unit Specification - MUTOH Toucan Hybrid PJ-162-FE User Manual

8.1 INTRODUCTION

This section explains the specifications, optional parts and supplies, installation procedures for optional
parts, and user support for this printer.

8.2 PRODUCT SPECIFICATIONS

8.2.1 TOUCAN HYBRID Unit specification

Item
Model name
Printhead Printing method
unit
Head gap
adjustment (Roll
media)
Head gap
adjustment (Rigid
media)
Drive method
Media feed method
Media fixing method
Media supply and discharge
Winding unit
Feed unit
Rigid media External
specifications
Weight
Thickness
Roll media External
specifications
Weight
Thickness
Max. media width
Max. print width Roll-to-roll
Rigid material
printing margins Roll-to-roll
Rigid material
Media cut method
(only in roll-to-roll)
Head height adjustment
CPU
Memory
Commands
Interface
Specifications
TOUCAN HYBRID
Piezo inkjet
Three levels
Low / Normal / High (2,5 mm / 3,0 mm / 3,5 mm)
Stepless adjustment between 4 mm and 75 mm by UP/DOWN
movement of jack
Firmware servo / DC motor drive
Multi-point pressure grid roller method
Pressurizing roller auto-down method
Back feeding / front paper discharge
Arm type sensor detects slack of paper and takes up the slack
Arm type sensor detects bracing (hang-up) of paper and feeds out the
paper
250mm (9.8 in.) or less
100 kg (220 Lbs.) or less
1.0mm or less when dial 000, otherwise adjust.
Width : 1626mm or less
Length : 3000mm or less
Thickness : 70 mm or less
30kg (66 Lbs.) or Less
70.0mm (2.8in.) or less
1626 mm (64.0in.)
1570 mm
1470 mm (guranteed quality)
1570 mm (printable quality)
Back: 0-50 mm , Left, right: 25,4 mm (1 inch)
Front: 0, Back:0, Left, right: 25,4 mm (1 inch)
Manual cut
Three levels: Low / Normal / High
64 Bit RISC CPU,
128MB
MH-RTL (RTL-PASS)
• Standard: bi-directional Centronics method (IEEE1284 compliant;
compatible, nibble, ECP mode)
245
User's Guide – Toucan Hybrid

8 APPENDIX

AP-750, Rev. 1.1 –- 23/04/04