GE Multilin g60 Instruction Manual page 72

3.2 WIRING
3
The phase voltage channels are used for most metering and protection purposes. The auxiliary voltage channel is used as
input for the synchrocheck and volts-per-hertz features.
Substitute the tilde "~" symbol with the slot position of the module in the following figure.
NOTE
3-14
UNSHIELDED CABLE
Ground connection to neutral
must be on the source side
Source
A B C N
LOAD
Figure 3–15: ZERO-SEQUENCE CORE BALANCE CT INSTALLATION
Current inputs
8F, 8G, 8L, and 8M modules (4 CTs and 4 VTs)
8H, 8J, 8N, and 8R modules (8 CTs)
Figure 3–16: CT/VT MODULE WIRING
G60 Generator Protection System
G
Ground
outside CT
Voltage inputs
Current inputs
3 HARDWARE
SHIELDED CABLE
Stress cone
Source
shields
A B C
To ground;
LOAD
must be on
load side
996630A5
842766A3.CDR
GE Multilin