GE Multilin g60 Instruction Manual page 38

2.1 INTRODUCTION
c) ORDER CODES WITH PROCESS BUS MODULES
The order codes for the horizontal mount units with the process bus module are shown below.
Table 2–5: G60 ORDER CODES (HORIZONTAL UNITS WITH PROCESS BUS)
G60 - * ** - *
BASE UNIT G60 | |
CPU E |
G |
H |
2
J |
K |
L |
M |
SOFTWARE 00
01
03
04
06
07
MOUNT/COATING
FACEPLATE/ DISPLAY
POWER SUPPLY
(redundant supply must
be same type as main supply)
PROCESS BUS MODULE
DIGITAL INPUTS/OUTPUTS
INTER-RELAY
COMMUNICATIONS
(select a maximum of 1 per unit)
2-6
* * - F ** - H ** - M ** - P
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
| | | | | |
H | | | | |
A | | | | |
C | | | |
D | | | |
R | | | |
A | | | |
P | | | |
G | | | |
S | | | |
B | | | |
K | | | |
M | | | |
Q | | | |
U | | | |
L | | | |
N | | | |
T | | | |
V | | | |
H | | |
H | | |
L | | |
L | | |
| 81 |
XX XX
G60 Generator Protection System
** - U ** - W/X ** Full Size Horizontal Mount
| | | Base Unit
| | | RS485 and RS485
| | | RS485 and multi-mode ST 10Base-F
| | | RS485 and multi-mode ST redundant 10Base-F
| | | RS485 and multi-mode ST 100Base-FX
| | | RS485 and multi-mode ST redundant 100Base-FX
| | | RS485 and single mode SC 100Base-FX
| | | RS485 and single mode SC redundant 100Base-FX
| | | No Software Options
| | | Ethernet Global Data (EGD); not available for Type E CPUs
| | | IEC 61850; not available for Type E CPUs
| | | Ethernet Global Data (EGD) and IEC 61850; not available for Type E CPUs
| | | Phasor measurement unit (PMU)
| | | IEC 61850 and phasor measurement unit (PMU)
| | | Horizontal (19" rack)
| | | Horizontal (19" rack) with harsh environmental coating
| | | English display
| | | French display
| | | Russian display
| | | Chinese display
| | | English display with 4 small and 12 large programmable pushbuttons
| | | French display with 4 small and 12 large programmable pushbuttons
| | | Russian display with 4 small and 12 large programmable pushbuttons
| | | Chinese display with 4 small and 12 large programmable pushbuttons
| | | Enhanced front panel with English display
| | | Enhanced front panel with French display
| | | Enhanced front panel with Russian display
| | | Enhanced front panel with Chinese display
| | | Enhanced front panel with English display and user-programmable pushbuttons
| | | Enhanced front panel with French display and user-programmable pushbuttons
| | | Enhanced front panel with Russian display and user-programmable pushbuttons
| | | Enhanced front panel with Chinese display and user-programmable pushbuttons
| | | 125 / 250 V AC/DC power supply
| | RH 125 / 250 V AC/DC with redundant 125 / 250 V AC/DC power supply
| | | 24 to 48 V (DC only) power supply
| | RL 24 to 48 V (DC only) with redundant 24 to 48 V DC power supply
| | | Eight-port digital process bus module
XX XX XX No Module
4A 4A | 4 Solid-State (no monitoring) MOSFET outputs
4B 4B | 4 Solid-State (voltage with optional current) MOSFET outputs
4C 4C | 4 Solid-State (current with optional voltage) MOSFET outputs
4D 4D | 16 digital inputs with Auto-Burnishing
4L 4L | 14 Form-A (no monitoring) Latching outputs
67 67 | 8 Form-A (no monitoring) outputs
6A 6A | 2 Form-A (voltage with optional current) and 2 Form-C outputs, 8 digital inputs
6B 6B | 2 Form-A (voltage with optional current) and 4 Form-C outputs, 4 digital inputs
6C 6C | 8 Form-C outputs
6D 6D | 16 digital inputs
6E 6E | 4 Form-C outputs, 8 digital inputs
6F 6F | 8 Fast Form-C outputs
6G 6G | 4 Form-A (voltage with optional current) outputs, 8 digital inputs
6H 6H | 6 Form-A (voltage with optional current) outputs, 4 digital inputs
6K 6K | 4 Form-C and 4 Fast Form-C outputs
6L 6L | 2 Form-A (current with optional voltage) and 2 Form-C outputs, 8 digital inputs
6M 6M | 2 Form-A (current with optional voltage) and 4 Form-C outputs, 4 digital inputs
6N 6N | 4 Form-A (current with optional voltage) outputs, 8 digital inputs
6P 6P | 6 Form-A (current with optional voltage) outputs, 4 digital inputs
6R 6R | 2 Form-A (no monitoring) and 2 Form-C outputs, 8 digital inputs
6S 6S | 2 Form-A (no monitoring) and 4 Form-C outputs, 4 digital inputs
6T 6T | 4 Form-A (no monitoring) outputs, 8 digital inputs
6U 6U | 6 Form-A (no monitoring) outputs, 4 digital inputs
6V 6V | 2 Form-A outputs, 1 Form-C output, 2 Form-A (no monitoring) latching outputs, 8 digital inputs
2A 2A C37.94SM, 1300nm single-mode, ELED, 1 channel single-mode
2B 2B C37.94SM, 1300nm single-mode, ELED, 2 channel single-mode
2E 2E Bi-phase, single channel
2F 2F Bi-phase, dual channel
2G 2G IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 1 Channel
2H 2H IEEE C37.94, 820 nm, 128 kbps, multimode, LED, 2 Channels
72 72 1550 nm, single-mode, LASER, 1 Channel
73 73 1550 nm, single-mode, LASER, 2 Channel
74 74 Channel 1 - RS422; Channel 2 - 1550 nm, single-mode, LASER
75 75 Channel 1 - G.703; Channel 2 - 1550 nm, Single-mode LASER
76 76 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 1 Channel
77 77 IEEE C37.94, 820 nm, 64 kbps, multimode, LED, 2 Channels
7A 7A 820 nm, multi-mode, LED, 1 Channel
7B 7B 1300 nm, multi-mode, LED, 1 Channel
7C 7C 1300 nm, single-mode, ELED, 1 Channel
7D 7D 1300 nm, single-mode, LASER, 1 Channel
7E 7E Channel 1 - G.703; Channel 2 - 820 nm, multi-mode
7F 7F Channel 1 - G.703; Channel 2 - 1300 nm, multi-mode
7G 7G Channel 1 - G.703; Channel 2 - 1300 nm, single-mode ELED
7H 7H 820 nm, multi-mode, LED, 2 Channels
7I 7I 1300 nm, multi-mode, LED, 2 Channels
7J 7J 1300 nm, single-mode, ELED, 2 Channels
7K 7K 1300 nm, single-mode, LASER, 2 Channels
7L 7L Channel 1 - RS422; Channel 2 - 820 nm, multi-mode, LED
7M 7M Channel 1 - RS422; Channel 2 - 1300 nm, multi-mode, LED
7N 7N Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, ELED
7P 7P Channel 1 - RS422; Channel 2 - 1300 nm, single-mode, LASER
7Q 7Q Channel 1 - G.703; Channel 2 - 1300 nm, single-mode LASER
7R 7R G.703, 1 Channel
7S 7S G.703, 2 Channels
7T 7T RS422, 1 Channel
7W 7W RS422, 2 Channels
2 PRODUCT DESCRIPTION
GE Multilin