E-118 NEXT : 10. Seatpost installation
10.1 Peel off the plastic of the double-
20
sided tape located at the back of the
seat clamp thread (3b).
CARBON FIBER
ASSEMBLY
10.2 Place the seat clamp thread (3b)
COMPOSITE
inside the frame.
10.3 Insert the seatpost (20) on which
some carbon fiber assembly gel has
been applied).
10.4 Position the seatpost to the
desired height and insert the seat
clamp wedge (3a).
10.5 Tighten the set screw to 10Nm
maximum.
3a
3b
GREASE
Max 10Nm
27