Table of Contents
Advertisement
NITROGEN PRO: 9. Seatpost Installation
GREASE
1. Peel off the plastic of the double-
sided tape located at the back of the
seat clamp wedge (11).
2. Place the seat clamp wedge (11+12)
8Nm
inside the frame.
3. Insert the seatpost (3) on which
11
some carbon fiber assembly gel has
GREASE
been applied.
4. Position the seatpost to the desired
height.
GREASE
12
5. Tighten the set screw at max 8Nm.
LOCTITE
1Nm
CARBON FIBER
ASSEMBLY
COMPOSITE
32
Advertisement
Table of Contents
