Seatpost Installation - Argon 18 nitrogen Assembly Manual

NITROGEN : 7. Seatpost installation
GREASE
7.1 Peel off the plastic of the double-
sided tape located at the back of the
seat clamp wedge (11).
7.2 Place the seat clamp wedge
6Nm
(11+12) inside the frame.
7.3 Insert the seatpost (3) on which
11
some carbon fiber assembly gel has
GREASE
been applied.
7.4 Position the seatpost at the desired
height.
GREASE
12
7.5 Tighten the set screw at max 6Nm.
GREASE
1Nm
CARBON FIBER
ASSEMBLY
COMPOSITE
21