Table of Contents
Advertisement
NITROGEN PRO 230A: 9. Seatpost Installation
RUNNING CHANGE
5.5 Nm
11
GREASE
THREADLOCKER
BLUE (n. 242)
1. Place the seat post collar inside the
frame.
11
GREASE
2. Insert the seatpost (3) on which
some carbon fiber assembly gel has
GREASE
been applied.
12
3. Position the seatpost to the desired
LOCTITE
height.
4. Apply a drop of blue Threadlocker
1Nm
(n. 242) on the bolt's thread
CARBON FIBER
ASSEMBLY
5. Tighten the set screw at max. 5.5Nm
COMPOSITE
while leaving a space between the two
parts allowing them to slide.
32
Advertisement
Table of Contents
