Front Brake Installation - Argon 18 E-118 NEXT Assembly Manual

E-118 NEXT : 7. Front brake installation
Install the brakes as shown in the
diagram.
7.1 Install the spring* (25d) in the
middle hole of the fork If more tension
is required, use the outer hole.
7.2 It is important not to mix the
springs of the front and rear brakes.
7.3 Respect the colour code: the spring
must be installed on the pivot of the
same colour.
GREASE
GREASE
GREASE
GREASE
25j
25b
*The short end of
the spring should
be positioned in the
notch of the spring
tensionner.
25a
25d
GREASE
25c
25e
25i
GREASE
25h
8Nm
8Nm
21