Table of Contents
Advertisement
7.2.1 Language
OSD Language:
Select the preferred language for the On Screen display.
1st Audio Language:
Select the preferred audio language for watching TV channels. This setting allows you
to define the default audio track or language.
Digital TV allows the operator to transmit more than one audio track or language. If a channel has
multiple audio tracks or languages, the receiver will select the suitable audio track automatically
according to your selection.
In the viewing mode you can change this selection to a more suitable variation, as described in
chapter 6.4.
If the language is not available, the default programme language will be used.
2nd Audio Language:
The receiver will use this language if the first language selection is not available
Subtitle Type:
Choose your preferred subtitle type between Normal and Hard of hearing.
Subtitle Display: Set to On to enable the display of subtitles, to disable set to Off.
1st Subtitle Language:
Select the preferred subtitle language for watching TV channels.
This setting allows you to define the default subtitle language. Digital TV allows the
operator to transfer subtitles in one or more languages.
In the viewing mode you can change this selection to a more suitable variation, as
described in chapter 6.5. If the language is not available, the default language will be set.
2nd Subtitle Language:
The receiver will use this language if the first subtitle selection is not available.
7.2.2 Output Settings
This submenu allows you to set the output parameters of the receiver according to a connected TV set
and to the audio amplifier (if applicable).
HDMI Resolution: Select the screen resolution according to the characteristics and supported modes of
your TV set. Available options: 576i, 576p, 720p, 1080i and 1080p.
NOTE:
Experiment with the settings to find the options that suit the best for you. You can
change the parameters of the viewing mode by pressing OPT.
NOTE:
Do not forget about the possibility to control the screen format from the menu of
your TV (depending on your TV device).
Aspect Ratio:
Select an aspect ratio depending on your TV set screen format.
Available options: 4:3 or 16:9.
Aspect Conversion: Change the aspect conversion.
Available options: Pan&Scan, LetterBox, Combined and Ignore.
NOTE:
If the receiver is connected to a TV with 4:3 aspect ratio, the most recommended
mode is LetterBox. In this mode the video in 4:3 format will not be converted and
the 16:9 format will be converted to display in full size and without geometric
transformations (displays full screen width and top and bottom of the screen shows
black horizontal bars).
14
Advertisement
Table of Contents
