Siemens SINUMERIK 805 Operating Instructions Manual page 162

5 Operating Sequences
5.3.11 MDA mode
06.90
0
..
0
Using the keyboard
enter
the block according
to
the instructions in the
Programming Guide and terminate each
entry
using the input key.
0.
After operating the NC-START key the entered block is processed
by the control and subsequently deleted.
Note:
You
can process several blocks one after the other. The "retentive input data" (e.g. feedrate)
are retained.
They are deleted or reset by:
•
changing the operating mode or
•
RESET
5-45
®
Siemens AG 1990 All Rights Reserved 6ZB5 410-0EE02
SINUMERIK 805, SW2 (BA)