Itb Contact Motor - Ricoh M022 Service Manual

1. Lubricate a part of the surface of the image transfer belt [A] with yellow toner, and then turn the image
transfer belt to the position [B] as shown above.
• Be sure to use yellow toner from the Z-C1; do not use lubricant powder, developer, or waste
toner.
• You can also use the provided service part: D0159500 (G104 Yellow Toner)
2. Install the ITB cleaning unit [A], and then collect the yellow toner by turning the image transfer belt
[B].

ITB Contact Motor

1. Rear cover ( p.147)
2. Open the controller box (
CÓPIA NÃO CONTROLADA
Controller Box).
CÓPIA NÃO CONTROLADA
Image Transfer
4
213