Test Pattern Printing - Ricoh M022 Service Manual

5. System Maintenance
1009 1 Enable or disable remote scan.
1010 [Non Display Clear Light PDF] *CTL
1010 1 Enable or disable remote scan.
SP2-XXX (Scanning-image quality)
[Compression Level (Gray-scale)]
2021
Selects the compression ratio for grayscale processing mode (JPEG) for the three settings that
can be selected at the operation panel.
5
2021 1 Level 3 (Middle Image Quality)
2021 2 Level 2 (High Image Quality)
2021 3 Level 4 (Low Image Quality)
2021 4 Level 1 (Highest Image Quality)
2021 5 Level 5 (Lowest Image Quality)
[Compression ratio of ClearLight PDF]
2024
Selects the compression ratio for clearlight PDF for the two settings that can be selected at the
operation panel.
2024 1 Compression Ratio (Normal image)
2024 2 Compression Ratio (High comp image)

Test Pattern Printing

Printing Test pattern: SP2-109
Some of these test patterns are used for copy image adjustments but most are used primarily for design
testing.
• Do not operate the machine until the test pattern is printed out completely. Otherwise, an SC occurs.
1. Enter the SP mode and select SP2-109-003.
608
CÓPIA NÃO CONTROLADA
[0 or 1 / 0 / - ]
0: Display, 1: No display
CÓPIA NÃO CONTROLADA
[5 to 95 / 40 / 1 /step ]
[5 to 95 / 50 / 1 /step ]
*CTL [5 to 95 / 30 / 1 /step ]
[5 to 95 / 60 / 1 /step ]
[5 to 95 / 20 / 1 /step ]
[5 to 95 / 25 / 1 /step ]
*CTL
[5 to 95 / 20 / 1 /step ]