Appendix: Sp Mode Tables; System Sp-Xxx; Sp1-Xxx (Feed) - Ricoh M022 Service Manual

3. Appendix: SP Mode Tables

System SP-xxx

SP1-XXX (Feed)

[Leading Edge Registration] Leading Edge Registration Adjustment
(Tray Location, Paper Type, Color Mode), Paper Type -> Plain, Thick 1, Thick 2 or Thick3
Adjusts the leading edge registration by changing the registration motor operation timing
1001
for each mode.
Increasing a value: an image is moved to the trailing edge of paper.
Decreasing a value: an image is moved to the leading edge of paper.
001 Tray:Plain
002 Tray:M-Thick
003 Tray:Thick1
004 Tray:Thick2
005 Tray:Thick3
006 Tray:Plain:1200dpi
007 Tray:M-Thick:1200dpi
008 Tray:Thick1:1200dpi
009 By-pass:Plain
010 By-pass: M-Thick
011 By-pass: Thick1
012 By-pass: Thick2
013 By-pass: Thick3
014 By-pass:Plain:1200dpi
015 By-pass: M-Thick:1200dpi
016 By-pass:Thick1:1200dpi
CÓPIA NÃO CONTROLADA
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
*ENG
CÓPIA NÃO CONTROLADA
[–9 to 9 / 3.9 / 0.1 mm/step]
[–9 to 9 / -0.4 / 0.1 mm/step]
[–9 to 9 / -2.5 / 0.1 mm/step]
[–9 to 9 / -3.7 / 0.1 mm/step]
[–9 to 9 / -3.5 / 0.1 mm/step]
[–9 to 9 / 0.8 / 0.1 mm/step]
[–9 to 9 / -0.5 / 0.1 mm/step]
[–9 to 9 / -0.5 / 0.1 mm/step]
[–9 to 9 / 3.9 / 0.1 mm/step]
[–9 to 9 / 0.1 / 0.1 mm/step]
[–9 to 9 / -1.8 / 0.1 mm/step]
[–9 to 9 / -2.7 / 0.1 mm/step]
[–9 to 9 / -2.4 / 0.1 mm/step]
[–9 to 9 / 0.8 / 0.1 mm/step]
[–9 to 9 / 0.1 / 0.1 mm/step]
[–9 to 9 / 0.1 / 0.1 mm/step]
3
19