System Maintenance; Service Program Mode; Sp Tables; Enabling And Disabling Service Program Mode - Ricoh M022 Service Manual

Hide thumbs Also See for M022:

Table of Contents

5. System Maintenance

• Make sure that the data-in LED ( ) is not on before you go into the SP mode. This LED indicates that

some data is coming to the machine. When the LED is on, wait for the copier to process the data.

See "Appendices" for the following information:

• System Service Mode

• Printer Service Mode

• Scanner Service Mode

• The Service Program Mode is for use by service representatives only. If this mode is used by anyone

other than service representatives for any reason, data might be deleted or settings might be changed.

In such case, product quality cannot be guaranteed any more.

Entering SP Mode

For details, ask your supervisor.

Exiting SP Mode

• Press "Exit" on the LCD twice to return to the copy window.

• System SP: SP modes related to the engine functions

• Printer SP: SP modes related to the controller functions

• Scanner SP: SP modes related to the scanner functions

• Fax SP: SP modes related to the fax functions

CÓPIA NÃO CONTROLADA

Table of Contents

M024 M026 M028