Trouble Shooting - ATCOM AT800 series User Manual

AT800 AT800 AT800 AT800 Series
g) Wait till the phone finish upgrading, and it will reboot automatically
How to to to to make How How How
Press headset key to hear dial tone, and then press the third softkey "number" twice to
switch to "IP". Using * key to inputting ".". If user wants to dial 192.168.1.100, then press
192*168*1*100. After inputting the IP address, press dial key to dial it out.
How to to to to connect How
How How
Headset is standard RJ9 jack in following PIN sequence(from left to right):
Mic-
Spk-
Spk+
Mic+
Please keep in mind that the wrong PIN sequence of the headset will bring a voice problem.
1) Opposite sequence of mic+ and mic-
Very low volume in headset
2) Opposite sequence of spk+ and spk-
No any problem
3) Opposite sequence of mic+/mic- and spk+/spk-
Can not use any more
Trouble Trouble
Trouble

Trouble shooting

Phone can Phone Phone Phone
1) Check the IP address. If set LAN port in DHCP mode, please make sure that the DHCP
server on.
2) Check the gateway
3) Check DNS server
4) Make sure the account information is the same as from ISP
5) Check the SIP server is on
6) Check the SIP register port, defaults to 5060
Device Device
Device can Device
1) Make sure the Ethernet cable is plugged in the LAN port
ATCOM TECHNOLOGY CO., LIMITED
Downloaded from www.Manualslib.com
Series Series Series User User User User Manual Manual Manual Manual
make make make direct direct direct direct IP IP IP IP calls calls calls calls
connect headset
connect connect headset headset headset
shooting shooting
shooting
can can can' ' ' ' t t t t register register register register to to to to the the the SIP the
can can can' ' ' ' t t t t obtain obtain obtain obtain IP IP IP IP address address address
address
manuals search engine
SIP SIP server. SIP server. server. server.
www.atcom.cn