Rtp Parameters - ATCOM AT800 series User Manual

AT800 AT800 AT800 AT800 Series
RTP RTP

RTP Parameters

RTP
ATCOM TECHNOLOGY CO., LIMITED
Downloaded from www.Manualslib.com
Series Series Series User User User User Manual Manual Manual Manual
SIP SIP T4 T4 T4 T4---RFC 3261 T4 value, which is the maximum duration a message remains in the
3. SIP SIP
network. Ranges from 0 to 64 seconds. Defaults to 5 seconds
4. Reg Reg Retry Reg Reg Retry Intvl Retry Retry Intvl Intvl Intvl---interval to wait before the phone retries registration after failing during
the previous registration. Defaults to 8 seconds.
5. Sub Sub Retry Sub Sub Retry Intvl Retry Retry Intvl Intvl---The retry interval when the last SUBSCRIBE request fails. Defaults to 10 Intvl
seconds.
Parameters Parameters
Parameters
RTP Port
1. RTP RTP RTP Port Port Port---Minimum port number for RTP transmission and reception. <RTP Port Min>
and <RTP Port Max> should define a range that contains at least 2 even number ports .
Defaults to 16384
2. RTP RTP RTP RTP Port Port Port Max Port Max Max---Maximum port number for RTP transmission and reception. <RTP port Max
Min> and <RTP Port Max> should define a range that contains at least 2 even number
ports. Defaults to 16482.
RTP RTP Packet Packet Size Size (ms) (ms)
3. RTP Packet RTP Packet Size Size (ms) (ms)---Packet size in milliseconds, which can be 10, 20, 30, 40, 60
Warning Warning Warning Warning: : : : Lin16-16 codec only supports RTP packet size = 10 ms because of the voice chip
limitation. G.723 only allows 30ms/60ms RTP packet size.
manuals search engine
www.atcom.cn