ATCOM AT800 series User Manual page 36

AT800 AT800 AT800 AT800 Series
Date Date
Date Date and
� NTP NTP
NTP NTP
� � � � Manual
Manual Manual Manual
� � � � Daylight Daylight
Daylight Daylight Saving
After finishing, click submit to make the changes effective.
ATCOM TECHNOLOGY CO., LIMITED
Downloaded from www.Manualslib.com
Series Series Series User User User User Manual Manual Manual Manual
and and Time Time
and Time Time
1. NTP server---Network Time Protocol. Set NTP Server, and both domain and IP address are
allowed.
2. Time zone---Choose proper time zone of the local time.
1. Set Local Date (YYYY/MM/DD)---Set a manual date by inputting in YYYY/MM/DD formate.
E.G. 2012/10/1. Or click the icon
2. Set Local Time(hh:mm:ss)---Set a manual time by inputting in hh:mm:ss formate. E.G.
12:00:00. Or click up/down button to increase/decrease the value.
Note: In manual mode, the date and time will be reset after a restart.
Saving Saving Time Time
Saving Time Time
1. Daylight Saving Time---Enable or disable the daylight saving time.
2. Daylight Saving Time Rule--- Set daylight saving time rule in format of:
start=<start-time>;end=<end-time>;save=<save-time>
<start-time> and <end-time> are of the form: MM/DD/WW/hh:mm:ss. <start-time> and
<end-time> specify the start and end time-date of daylight saving time.
<save-time> is the amount of hour/min/sec to add to the current time during daylight saving
period. The <save-time> value can be preceded by a negative (-) sign if subtraction is desired
instead of addition.
E.G. start=4/1/7/8:00:00;end=10/1/7/9:00:00;save=-1
st
Start time is 1 April, Sunday, 8:00:00 am
st
End time is 1 October, Sunday, 9:00:00 am
The display time will be one hour early than the standard time.
manuals search engine
to choose the date on calendar.
www.atcom.cn