Volume And Mute; Volume; Mute; Hold - ATCOM AT800 series User Manual

AT800 AT800 AT800 AT800 Series
1. Press headset button, enter number and # (send key) to dial
2. Press headset button, enter a speed dial number, the pre-configured number will be dialed
3. To hang up the active call, press headset button again.
Note: If setting * as the send key, use * instead of #, If send key is set to none, wait for about 10 seconds,
the number will be dialed automatically.
Volume and

Volume

Volume Volume
Volume
Volume Volume Volume
To adjust the output volume in a conversation, press right navigation button to increase the volume, or
press left navigation button to decrease the volume.
Pressing the right/left navigation button on idle state can adjust the volume of the phone's ringer.

Mute

Mute
Mute Mute
To mute the call in a conversation, press the Mute button, the button lights in red. Press the Mute button
again to unmute.

Hold

Hold Hold Hold
� To put a call on hold in a conversation, press the hold softkey to hold the call
� When setting a programmable key to hold function, press the specified key will hold the call.
For AT800/AT800P, using programmable key to put a call on hold, refer to
details.
Resume Resume a a a a call Resume
Resume
� To resume a held call, press Resume softkey.
� When setting a programmable key to hold function, pressing the specified key again in hold mode
can resume the call.
�
For AT800/AT800P, using programmable hold key can resume the call, refer to
details.
ATCOM TECHNOLOGY CO., LIMITED
Downloaded from www.Manualslib.com
Series Series User Series User User User Manual Manual Manual Manual
and and and Mut Mut Mute e e e Mut
call call
call
manuals search engine
Programmable key for more
Programmable key
www.atcom.cn
for