Operating The Base Station On The Pabx; Changing The Dialling Mode; Setting Recall; Setting Pauses - Siemens GIGASET A580 User Manual

Operating the base station on the PABX

The following settings are only necessary when your PABX requires them; see
the PABX user guide. The settings only affect fixed line network connections.
You cannot send or receive SMS messages on PABXs that do not support Calling
Line Identification.

Changing the dialling mode

You can set the dialling mode.
¢
§§Menu§
Tone / Pulse
a
Please remember
u
Suffix dialling (for selecting the connection) is not possible in conjunction
with pulse dialling: a hash "#" is displayed during dialling but ignored when
pulse dialling is used.
u
Enter an asterisk "*" to switch temporarily to touch tone dialling. The aster-
isk is not displayed.

Setting recall

Your phone is preset at the factory for operation on the main connection (recall
250 ms). For operation on a PABX, you may have to change this value. Please
refer to the user guide for your PABX.
¢
§§Menu§
q
The current setting is indicated by ‰.
a

Setting pauses

Changing pause after line seizure
You can set the length of the pause inserted between pressing the talk key c
and sending the phone number.
M 4 O L
§Menu§
~
¢ ¢
Settings Base
Select and press
§OK§
Press and hold (idle status).
¢ ¢
Settings Base
Select recall and press
Press and hold (idle status).
Enter a number for the length of the pause (1 = 1 sec.; 2 = 3 sec.;
3 = 7 sec.) and press
Operating the base station on the PABX
¢ ¢
Telephony Phone
(‰ = on).
¢ ¢
Telephony Phone
.
§OK§
.
§OK§
Dialling Mode
Recall
101